Solar Agricultural Element


The mounting system of the Solar Agricultural Element enables high electricity production by solar fences with a low and careful use of materials. Photovoltaic panels on agricultural land have a high potential to drive the energy transition.

The universal mounting system can be easily adapted in design to the PV panels used. Thanks to the better mounting, higher photovoltaic fences are possible, which offer more yield and thus an earlier refinancing of the system

Easy installation of the mounting system

The earth screw sleeve is screwed deep into the solid soil layer after drilling an earth hole. Then the shear plate can be inserted. Finally, the pole is installed, to which the solar modules of various manufacturers can be directly attached.

  • Higher photovoltaic fences possible (up to three levels)
  • Material-saving mounting form
  • Significantly lower use of resources
  • Proven mounting materials and methods
  • Easy installation & residue-free removal

Taproot principle for higher loads

In order to safely install photovoltaic fences on open areas, a high amount of concrete must be placed in the ground. With the taproot principle, surface sealing can be minimized.

Parallel to a taproot, the system consists of an earth screw sleeve that absorbs tensile forces or transfers bending moments into the soil. The shear-pressure plate protects the system under high wind loads and has shallow roots just below the loose soil layer as a parallel.


Technical Information

Parameter SAE-BS
Color & Power Depending on the PV Panel used
Pole Material Stainless Steel
Earth Screw Sleeve Material

Stainless Steel

Shear-Pressure Plate Material Steel enforced Concrete

1850 x 960 x 3500 mm

Weight  200 kg